Tiếng Việt
Silicone Rubber - Tin Cure
Silicone Rubber - Platinum Cure
Urethane Rubber
Polysulfide Rubber
Urethane Resins
Epoxy Casting and Laminating Resins
Epoxy and Urethane Coatings
Mix and Pour Expanding Foams
Flame Rated Materials
Adhesives
Lifecasting Materials
Skin Safe FX Materials
Sealing and Release Agents
Colorants and Fillers
Expanding Foams
Pigment
Silicone Adhesives
Silicone Accessories
Polyurethane Plastic
Polyurethane Rubber
THI-VEX™ is made especially for thickening Smooth-On silicones for vertical surface application (making brush-on molds). Different viscosities can be attained by varying the amount of THI‑VEX™ added. THI-VEX™ is added as a percentage of Part A and must be thoroughly mixed with Parts A and B. THI-VEX™ is skin safe and certified by an independent laboratory.
Instructions
THI-VEX™ will not work with Mold Max™ 40, Mold Max™ 60 or Solaris™ silicones.
Safety - Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.
Store and use material at room temperature (73°F/23°C). This product has a limited shelf life and should be used as soon as possible.
MEASURING & MIXING - If using Mold Max™, the brush-on mold process can be shortened with Fast Cat™ 30 catalyst or Accel-T™ cure accelerator. Because silicones have a long pot life, time between coats can be 2–3 hours. Adding Fast Cat™ 30 catalyst or Accel-T™ cure accelerator will accelerate the brush-on mold making process down to a matter of hours.
Mixing - Add desired amounts of THI-VEX™ to material and mix thoroughly. Important: Be sure to scrape the sides and bottom of the mixing container several times while mixing. Be aware of your working time. Note: results may differ due to variables in temperature, humidity, etc.
Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.
